Description
Fluke 87V Industrial True-RMS Multimeter
The Fluke 87V is an industrial digital multimeter engineered for demanding electrical troubleshooting. It combines True-RMS measurement, a selectable low-pass filter for variable-frequency drives, fast peak capture and a high-visibility dual-resolution display for work on automation, power distribution and electromechanical systems.
Key capabilities
- True-RMS AC voltage and current measurement
- Low-pass filter for accurate measurements on variable-frequency drives
- Peak capture for intermittent events as fast as 250 μs
- Min/Max/Average recording, relative mode and Touch Hold
- Integrated temperature measurement
- Large backlit display with analogue bar graph
- Input Alert warning for incorrectly connected test leads
- Electrical safety rating CAT III 1000 V and CAT IV 600 V
Electrical specifications
| DC voltage | Up to 1000 V; basic accuracy ±(0.05% + 1); maximum resolution 10 μV |
|---|---|
| AC voltage | Up to 1000 V True-RMS; basic accuracy ±(0.7% + 2); maximum resolution 0.1 mV |
| AC bandwidth | 20 kHz; low-pass filter 3 dB at 1 kHz |
| DC current | Up to 10 A continuous; 20 A for up to 30 seconds; maximum resolution 0.01 μA |
| AC current | Up to 10 A continuous; 20 A for up to 30 seconds; True-RMS |
| Resistance | Up to 50 MΩ; maximum resolution 0.1 Ω |
| Capacitance | Up to 9,999 μF |
| Frequency | Up to 200 kHz |
| Duty cycle | Up to 99.9% |
| Temperature | Meter range -200 °C to 1090 °C, excluding probe limitations |
| Display | 6000 counts; 19,999 counts in high-resolution mode |
Environmental and mechanical data
| Operating temperature | -20 °C to +55 °C |
|---|---|
| Operating altitude | Up to 2,000 m |
| Dimensions | Approximately 201 × 98 × 52 mm with holster |
| Weight | Approximately 355 g; 624 g with holster |
| Battery life | Approximately 400 hours without backlight under typical conditions |
| Safety | EN 61010-1; CAT III 1000 V / CAT IV 600 V |
Typical applications
Industrial maintenance, motor drives, VFD systems, plant automation, power distribution, control panels, pumps, compressors and electromechanical equipment.
Supply scope and ordering
Standard package content may vary by market and kit. It commonly includes the meter, compatible test leads, alligator clips, protective holster, temperature probe and installed battery. Confirm the exact kit reference, calibration requirement, test-lead version, certification and destination before order.
Reviews
There are no reviews yet